This Transformer is used in Boiler operations. Input voltage220/230V and output voltage O-SKV, 0-7.5KV, 0-10K , SKV-O-SKV,7.5KV-0-7.5KV with a capacity of 30 mA max load, available enclosedtype only. Auto transformer This transformer used for theinstruments and equipment operating at a different voltage from thesystem volts. Available open and enclosed type, for any capacityand voltage. (ie 110Vl220 or 220/110V). Motor starter AutoTransformer Three phase auto transformer is for short time loadingsonly, to start the motor with taps at SO%, 60%, 80% of voltages.Open type for smaller capacities and enclosed type of highercapacities are available. Isolation transformers The input andoutput for voltages are same and there will be an electrostaticshield to earth between input and output to eliminate theinterruptions of the system voltage. This includes 100VA to 2KVAcapacities. Site Transformers In construction site, the equipmentsand tools are compelled to operate at 110Volts as safety concern.For this application, we provide transformers 2KVA to 2S KVAcapacity. These are available in 3 phase and single phase input ofdifferent voltages and output as 110 volts (55V-55V) with centretap earthed to half the potential risk. All these transformers areenclosed type in sheet metal enclosures, Strong enough thick sheetsare used with best finished (powder coated) visible colors. Socketsfor 16A andl 32A 3 pins are provided as per the customers demand.One MCB on input side and MCB for each sockets are there to protectoverload of the tools and transformers. Entry cable gland for inputsupply is provided
