Main technical parameters of pvc welding machineRated voltage: AC110-240V Frequency: 50-60Hz Power: 800-1600W Temperature range:0-500??Speed scope:1-10m/min Specifications: 41*25*20cmWeight: 13Kg welding width: 2-5cmCharacterics of pvc welding machine1:wel ding without glue. It replaces the 502 glue and improves the working environment of workers, improve efficiency and quality of welding.It is a low-carbon and environmentally product, it is the inevitable trend of development in the future. 2: The theory is based on digital control constant temperature. It is equipped with temperature feedback sensor.The sensor can always monitoring the temperature of the outlet to keep a constant temperature.It uses advanced PID control technology, and adjust the power to make the temperature more constant automatically , the fluctuation is within 5 degrees.It makes welding more uniform.It uses zero-crossing trigger control IC,there is no harmonic interference, so no matter how long the picture is, the mosaic effect will not change. 3: speed : 6-10m per minute . you can ajust the speed according to setting temperature and the thickness of picture. 4: Temperature scope: 0-500oC . Temperature can be setted with the up and down buttons according to the thickness of picture.5: R & D capacity: Our company has all the key technology, the quality of the machineis//is in control.6: power: 1000-1600W ( After Setting the desired temperature , it will automatically adjust the power according to the temperature). 7:Hot air speed of hot air gun .50-100 percent of the wind speed can be adjusted, so you can fight a thick picture to ensure easier,and the heater parts live longer. 8: Heater: Equiped with AC motorand it makes wind stronger,life longer(more than 2000 hours), and cost is low because you only need to replace the carbon brush.
