Main office in Hong Kong for Wholesale & Export of Lamella Doctor Blade for Rotogravure & Flexographic Printing. We have our production / manufacturing unit in India, our product made from high quality steel raw from europe & technically, mechanically & physical prepared with good hardness, tensile strength, straightness, flatness, camber, edge conditions which are very essential for better & consistent printing sessions.
We produce with 0.10 to 30mm thickness & width by 8mm to 80mm
LAMELLA PROCESSING : optimized process to produce superior quality of blades with near zero thermal damage
MATERIAL: High Quality European steel for doctor blade Application
HARDNESS : ideal hardness of 580 HV
TENSILE STRENGTH : superior tensile strength of 1950 - 2100 Mpa
STRAIGHTNESS : 1.0mm / 3000 mm
FLATNESS : 0.2 percent across the width
EDGES : smoothest of edges for trouble free printing
The life of the our doctor blade is almost seven to eight time more than that of conventional blades because of the EUROPEAN HIGH QUALITY REFINED STEEL FOR DOCTOR BLADE Application.
The less area of contact (Ground thickness 0.07 + / -0.05 mm)& perfect lapping produces minimum frictional forces between cylinder & blade, which enhances life of the cylinder.
Negligible pressure (TONAL VALUE) over the cylinder due to perfect lapping over the entire length of the edge.
Unique profile, which eliminates TRIAXIALITY OF STRESSES, which in turn, increases life of blade considerably.
The hassle free running of your rotogravure printing machine due to our LAMELLA DOCTOR BLADE saves your cost on the valuable substrate, ink, labour, machine down time, conventional blade & its making.
Packed securely in an attractive corrugated box, which can easily be moved on the shop floor from one station to another.
