Extruded:The machine is designed for low tube finning operations with a fast and easy set-up and changeover. Typical set-up/changeover time is 10-15 minutes. The machine has three rolling heads. Material can be: copper and copper alloys, aluminium of all alloys, steel (common and stainless). Machine operation and part programming are done at the machine CNC/PLC control panel. Programming is user friendly and very easy to learn, with minimal time required to create complete programs for finning operatoins.1) Maximum pressure applied: 300 kN2) Maximum fin diameter: 60 mm.3) Maximum through feed length: Unlimited meters4) Maximum head inclination: 6 deg.5) Main motor power: 100 hp6) Fin per inch: 6 - 26 fpi7) Tube diameter: 10 - 80 mm.8) Productivity: 3-7 m/min.High frequency welding machine:1. TubeTube Diameters(O.D) : 25.4-219 mmTube Wall Thickness : 2.0-10.0 mmTube Length : 3, 000-22, 000 mmTube Material : Carbon Steel, Low Alloy Steel, Stainless Steel(Martensitic, Austenitic, Ferritic)2. FinFin Thickness : 0.8-2.5 mmFin Hight (After Welding) : 12-26 mmFin material : Carbon Steel, Low Alloy Steel, Stainless Steel(Martensitic, Austenitic, Ferritic)Fin per inch: 1-8
